Accéder au contenu principal

SMPP

 SMPP (Short Message Peer-to-Peer) is a protocol used for exchanging short message data between entities, such as SMS (Short Message Service) service centers and external applications. It is commonly used by businesses and organizations to send and receive SMS messages and other short messages, such as alerts and notifications.


SMPP is based on a client-server model, in which a client (such as an SMS service center or an external application) sends and receives messages through an SMPP server. The client and server communicate with each other using a series of commands and responses that follow a specific format.


When a client wants to send an SMS message using SMPP, the following process occurs:


The client connects to the SMPP server using a network connection, such as TCP/IP.

The client sends a message to the server indicating the sender and recipient of the SMS message, as well as the content of the message.

The server checks that the recipient's phone number is valid and, if it is, sends a message indicating that the SMS message has been accepted.

The server delivers the SMS message to the recipient's mobile phone.

SMPP is a widely used protocol for exchanging short message data, and it is particularly useful for businesses and organizations that need to send and receive large volumes of SMS messages or other short messages. It is flexible and scalable, and it is supported by many SMS

Commentaires

Posts les plus consultés de ce blog

Gérer les requêtes USSD sur un MoDem avec les commandes AT

Introduction L'USSD (Universal Structured Service D) est un service des réseaux télécoms defini dans 3GPP TS 02.90 et dans 3GPP TS 23.090. Il permet à un terminal mobile d'effectuer des requetes ou une suite de requete à l'operateur. Il est courament utiliser pour consulter le solde. Dans ce tutoriel nous apprendrons à effectuer des requetes USSD depuis une connection serie avec une modem. Pré requis Pour utiliserons pour ce faire: un modem GSM (Huawei E1552) bien sur avec une carte SIM (AIRTEL Burkina) un ordinateur auquel sera connecte le modem un terminal (minicom) pour dialoger avec le modem depuis l'ordinateur perl, pour encoder et decoder les PDU Demarche Nous allons consulter le solde du compte de l'utilisateur. Pour l'opérateur courant il faut composer le code USSD *160#. connecter le modem Connectez le modem au port USB de l'ordinateur et retrouvez ses port series logiciels. Notre modem créé trois ports series (/dev/t

IANA TCP UDP Ports

Port TCP UDP Description Status 0 UDP Reserved Official 0 TCP Programming technique for specifying system-allocated (dynamic) ports[2] Unofficial 1 TCP UDP TCP Port Service Multiplexer (TCPMUX) Official 2 TCP UDP CompressNET[3] Management Utility[4] Official 3 TCP UDP CompressNET[3] Compression Process[5] Official 4 TCP UDP Unassigned Official 5 TCP UDP Remote Job Entry Official 7 TCP UDP Echo Protocol Official 8 TCP UDP Unassigned Official 9 UDP Wake-on-LAN Unofficial 9 TCP UDP Discard Protocol Official 10 TCP UDP Unassigned Official 11 TCP UDP Active Users (systat service)[6][7] Official 12 TCP UDP Unassigned Official 13 TCP UDP Daytime Protocol (RFC 867) Official 14 TCP UDP Unassigned Official 15 TCP UDP Previously netstat service[6] Unofficial 16 TCP UDP Unassigned Official 17 TCP UDP Quote of the Day Official 18 TCP UDP Message Send Protocol Official 19 TCP UDP Character Generator Protocol (CHARGEN) Official 20 TCP UDP FTP data transfer Official 21 TCP FTP 

INTERUPTEUR CREPUSCULAIRE

BUT : contrôler l’allumage et l’institution d’une lampe électrique en fonction de l’intensité de la lumière ambiante. FONCTIONNEMENT : le potentiomètre RV2 règle la sensibilité à la lumière. S’il fait assez noir, la lampe s’allume. Si par contre,s' il y’a assez de lumière alors la lampe s’éteint. La résistance variable RV1 permet de régler le décalage entre le seuil d’allumage et le seuil d’instinction. INTERET : sécurité, automatisation et économie d’énergie. SCHEMAS :